| Hardware
Platforms |
| Stratus® Continuum®
systems |
Models 418, 428, 419, 429, 439,
449;
DC and AC options |
| Stratus
ftServer® T Series systems |
Model T30: DC and AC options |
| UNIX® operating systems |
| HP-UX® operating system |
32-bit HP-UX 11.00.01, 64-bit
HP-UX 11.00.03 |
| ftServer
T Series system |
Stratus fault-tolerant Linux® 2.2 |
| System I/0
adapter support |
| TCAP and ISUP |
U420 supports 1 T1/E1 port and
8 SS7 links (32-bit HP-UX only), U403 and U405 support 4 V.35
ports/SS7 links (32-bit HP-UX only) |
| TCAP |
U916/U918 supports 4
T1/E1 ports, 32 TCAP low-speed SS7 links |
| ISUP |
U916/U918 supports 4 T1/E1
ports, 16 ISUP low-speed SS7 links |
| Stratus Continuum systems
(32-bit HP-UP) |
Up to 8 V403, V405, or V420:
maximum 128 SS7 links per system |
| Stratus Continuum systems
(64-bit HP-UP) |
Up to 8 U916s: maximum 128 SS7
links per system |
| Stratus T Series systems |
Up to 4 U918s: maximum 128 SS7 links per
system |
| Sun servers |
Up to 3 U916s: maximum 96 SS7
links per system |
| SINAP/SS7
features |
| Multistack |
Supports 1 to 4 nodes (point
codes) |
| Application memory requirement |
Supports 32-bit and 64-bit mode
applications |
| Node Management Subsystem |
Includes: (a) operational
support for managing client applications, SS7 stack, and SS7
network and (b) application infrastructure support for
inter-process messaging, timers, event handling, and software
reliability |
| Built-in Test Environment
(BITE) |
Monitors applications,
processes, nodes, links, IPC; includes built-in log analysis
program |
| Simple Network Management
Protocol (SNMP) |
MIB and subagent (SNMP v1, v2c,
v3) |
| SINAP/IP
features |
| IPAS in ASP mode |
Enables IPAS (ASP)to third-party Signaling
Gateway (SG) connectivity |
| IPAS in IPSP mode |
Enables IPAS (IPSP) to IPAS (IPSP) or
third-party (IPSP) connectivity |
| SINAP/SS7
protocol conformance |
ITU-88 based MTP1, MTP2, and
MTP3;
ITU-93 options |
Q.701, Q.702, Q.703, Q.704,
Q.707 |
ITU-88 based and ITU-91
ISUP;
ITU-93 options |
Q.761, Q.762, Q.763, Q.764,
Q.767 |
| ITU-97 and ITU-93 based ISUP
variants |
UK (97), Belgium, china,
Telstra (Australia), NTT, Spain, Mexico, Germany, Taiwan, Sweden,
France Telecom |
| ITU-91 Q.767 based ISUP
variants |
Netherlands, Italy, Brazil |
| ITU-88 based TCAP with ITU-93
options |
Q.771, Q.772, Q.773, Q.774 |
| ITU-88 based SCCP with ITU-93
options |
Q.711, Q.712, Q.713, Q.714 |
| ANSI-90/92/01** based MTP1,
MTP2, MTP3 with partial support for '96 and '88 legacy support |
ANSI T1.111 |
ANSI-90 based SCCP with support
for '92 GTT.
Additional partial support for '96* |
ANSI T1.112 |
| ANSI-88/90/92 based ISUP |
ANSI T1.113 |
| ANSI-90/92 based TCAP |
ANSI T1.113 |
| China SS7 - August 1990 |
GF001-9001 |
| NTT - ISUP |
NTT - Q.762a, Q.763-a, Q.764-a,
Edition 1-1 |
| NTT - MTP |
NTT - Q.700, Q.701-b, Q.702-a,
Q.703-a, Q.704-b, Q.707-b |
| TTC - 94 |
JT - Q.700-704, Q.707,
Q.711-714, Q.771-714. GTT to '94 Q.713 and Q.714 |
| SINAP/C-SLEE and J-SLEE
protocol conformance |
ETSI INAP, CS1, CS2**; CAMEL**;
AIN 0.1** |
| SINAP/SS7-TCAP performance
(simple application) |
Up to 10,000 TCAP TPS @ 80% CPU
utilization |
| TCAP response times |
Average < 50 ms, 95% <
100 ms, 99% < 250 ms |
| SINAP/IP
protocol conformance |
| SCTP |
RFC-2960, RFC 3309, RFC 3257,
draft-ietf-tsvwg-sctpsocket-07, draft-ietf-tsvwg-sctpimpguide-08,
draft-ietf-tsvwg-addip-sctp-07 |
| M3UA |
RFC 3332, draft
ietf-sigtran-m3ua-implemtors-guide-04.txt |
| SINAP/SIP
protocol conformance |
| SIP (Core Stack and User Agent Toolkit) |
RFC 3261, 3262, 2976, 3311, 3428, 3312,
3515, 3265, 3204 |
| SDP |
RFC 2327, 3264, 3388 |
| |
Compliant to a variety of extension drafts
(Compliance document available upon request) |
| SINAP/SS7
configuration support |
| Links per SINAP platform |
128 Low Speed Links (LSL) |
| Link operating speeds |
CCITT/ANSI/China/Korea: 4.8,
9.6, 19.2, 38.4, 56, 64 Kbits/s
NTT: 4.8, 48, 64 Kbits/s |
| Max. number links/link sets |
16 |
| Max. number of routes per route
set |
ITU/NTT/China/Korea: 8; ANSI: 4 |
| Max. number route sets/node |
2,048 (4 nodes: max. of 8,192
route sets) |
| Max. number applications
registered with a SINAP node |
32 (4 nodes: max. of 128
applications) |
| Max. processes registered with
a SINAP node running concurrently |
255 |
| Max. instances per application |
16 |
| Max. links per combined link
set (CLS) |
32 ANSI |
| SINAP/IP
configuration support |
| Max. number SGP per IPAS |
16 |
| Max. number SSNs for all IPASs |
254 |
| Max. number IP Addresses per SCTP endpoint |
2, a primary and a secondary for
multi-homing |
| Max. number SCTP associations to a single
endpoint |
1, may be multi-homed |
| Max. number SCTP associations per stack |
200 on each of four stacks (each stack 1-2
IP interfaces) |
| Max. number remote OPC per IPAS |
128 |
| SINAP/SIP
features |
| SIP stack |
Provides support of SIP stack |
| SIP User Agent Toolkit |
Provides higher level API for building SIP
UA clients and servers |
| SINAP/SIP
configuration support |
| IP Transport |
TCP, UDP, TLS |
| Threading mode |
Single/multi-threaded |
![Stratus Technologies [logo]](../../images/logo-on-white4.gif){kind=logo}
![Left Corner [Learn More]](http://www.stratus.com/images/learn-tab-left.gif)
![Right Corner [Learn More]](http://www.stratus.com/images/learn-tab-right.gif)